pic: 4576 RNR CAD Angle 2

[tjustic3]

Originally Posted by Aaron Ng

there is a cutout in the front. looks like 1in. Along with the tilt given from the ramp, looks like it would be easy to go over the rock wall.

I cant really judge the height of the robot because of the odd angles, but it looks like it is around 16in. to go under the low bar, the robot (at least the fount and back) has to be well below 16in because of the tilting that the robot will face driving up and down the ramp. for my team, we have set 14in to be the max height any part of the robot.

The whole robot assembly is currently sitting at 14.125 inches tall allowing easy clearance all the way around.