Robot is not receiving code!

Team newb: To expect any average group of high schoolers to build and develop a robot in less than six weeks is...madness! Me: Madness? THIS IS FIRST! - MishraArtificer [more]

		Chief Delphi > Technical > Control System
Robot is not receiving code!

Thread Tools

Rate Thread

Display Modes

09-02-2016, 16:28

dlsmith

Registered User

FRC #5268

Join Date: Feb 2016

Location: BioMech Falcons

Posts: 15

dlsmith is an unknown quantity at this point

Re: Robot is not receiving code!

Have you tried deploying the code without having the driver station program running? We ran into a problem like that this year also, and it seemed that always closing the driver station before deploying the code helped. If that's not the problem you are having, I would suspect a problem with the robot code that you are building or possibly with the toolchain versions on the PC that built the code (I know you checked that already...)

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:45.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.