Spider-Man style Tower scale

[zinthorne]

The frame rule just says that your 15 inch plane rotates with the plane of your robot correct?

[GreyingJay]

Yes. You would need to make sure that the robot never tips vertically (such that it "drives" up the wall).

[bogally99]

We had also considered a system like this, the problem with shooting darts up is that they are unreliable. Instead we are considering a telescoping arm that can just drag a hook up there. The arm doesn't have to be strong since it never takes more than the hook's force. Then in order to stay perpendicular to the wall we are going to mount the cable to the back of the frame as well as the motor.

We haven't been able to test this yet as it is the last thing we would put on our robot given the time. I would recommend that you don't focus on the lifting until you have everything else perfect. The lifting is one of the most difficult challenges and has a very small benefit. I mean you get 10 extra points for adding an entire new subsystem.

Either way good luck with this, it will be challenging.

[carpedav000]

The other thing is, there is no possible way to get a nerf gun to fire a dart that heavy more than 5 ft (unless you make something known as a pumpsnap)

[bogally99]

Originally Posted by carpedav000

The other thing is, there is no possible way to get a nerf gun to fire a dart that heavy more than 5 ft (unless you make something known as a pumpsnap)

That is what I was thinking about, with all that added weight from a hook you won't be very accurate and you will suffer from too little power. 5 feet may be good enough to reach the bar, but when I calculated this I couldn't even get that high.

[carpedav000]

Originally Posted by bogally99

That is what I was thinking about, with all that added weight from a hook you won't be very accurate and you will suffer from too little power. 5 feet may be good enough to reach the bar, but when I calculated this I couldn't even get that high.

Unless you built a pumpsnap

[Sperkowsky]

Originally Posted by bogally99

We had also considered a system like this, the problem with shooting darts up is that they are unreliable. Instead we are considering a telescoping arm that can just drag a hook up there. The arm doesn't have to be strong since it never takes more than the hook's force. Then in order to stay perpendicular to the wall we are going to mount the cable to the back of the frame as well as the motor.

We haven't been able to test this yet as it is the last thing we would put on our robot given the time. I would recommend that you don't focus on the lifting until you have everything else perfect. The lifting is one of the most difficult challenges and has a very small benefit. I mean you get 10 extra points for adding an entire new subsystem.

Either way good luck with this, it will be challenging.

That is basically what we have. We have a solid working shooter right now so we developed a climber. Should be done tomorrow. We have 3 telescoping PVC pipes connected with surgical tubing and para cord that get winched up extended the hooks to the bar. The hooks are then attached to a separate winch with some pulleys to balance the weight. I do not know how well or even if its going to work but I should be able to tell you tomorrow.

[Peyton Yeung]

I wonder if this would work.

[Golfer4646]

Originally Posted by Peyton Yeung

I wonder if this would work.

Close enough?

[asid61]

You can make your own nerf-like gun using PVC. I feel like a compressed air system would be illegal though, need to double-check the rules on that.

[carpedav000]

Originally Posted by asid61

You can make your own nerf-like gun using PVC. I feel like a compressed air system would be illegal though, need to double-check the rules on that.

That is what a pumpsnap is

http://www.nerfitalia.it/wp-content/...RainbowMk2.png