|
Re: Bumpers sticking out 1" beyond frame perimeter
Quote:
Originally Posted by jamesmcip
Sorry for asking, but what specific rule would this violate? Unfortunately as it stands our frame perimeter cannot be any larger so we would have to modify the bumpers to make it work. One thing we could do is cut 1" x 6" "clearance holes" as defined by R21A to help with clearing our intake motor.
|
Just make it "the gap" 1 inch or less considering the hard parts/fastner of your front bumper. 1" is not more than 1".
"Hard BUMPER parts allowed per R21-A, R21-E, R21-F, and R21-G must not extend more
than 1 in. beyond the FRAME PERIMETER with the exception of minor protrusions such as
bolt heads, fastener ends, rivets, etc"
__________________
Iron Kodiaks Team #5137 San Marcos, CA
2016 Semi-Finalist | Central Valley Alliance Captain #2
2016 Semi-Finalist | San Diego 2nd bot alliance #8
2015 Semi-Finalist | Ventura 3rd bot alliance #3
2015 Quarter-Finalist| San Diego 2nd bot alliance #5
2014 Rookie All-Star | #21 San Diego | Galileo Division #91
Last edited by Boltman : 14-02-2016 at 21:12.
|
Don't feel intimidated, we don't bite =). - nehalita [more] 
14-02-2016, 21:02
Threaded Mode