|
|
|
 Robotics is about people. It always was, it always will be. What more guidelines do we need? - Ken Leung [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Robotics is about people. It always was, it always will be. What more guidelines do we need? - Ken Leung [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
15-02-2016, 09:00
|
||||
|
||||
|
Re: Pneumatic Regulators from Automation Direct
I work at AutomationDirect and am happy to answer any questions.
The regulator works great and is used in industry all over the world. I think the issue you are going to run into is the rules (R77i) specify the max output pressure of any regulator used has to be 60psi. This one goes to 130psi so if I am reading the rules correctly, this would not be legal. Of course, if it is downstream from a 60psi regulator I wonder if that still applies ... the rules don't see to allow for that ... |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode