Poll: How many CIMs are you using?

[MaGiC_PiKaChU]

Because polls are fun!

[waialua359]

Last year we used 2, this year 2.

[GeeTwo]

Four drive CIMs this year, supplemented with a PG-27 on our intake wheels and pneumatics for intake extend/retract, stretching the launch springs, and engaging/releasing the latch on the launch springs.

Last year we also had four CIMs, three for the H/slide drive, and one for the lift, no other actuators. (We had a passive pickup.)

[Dibit1010]

We are using 6 CIMs, 2 miniCIMs, and two window motors

[Dalas]

I voted 6, but we're actually using 4-CIMs and 4-miniCIMs (in our drivetrain), as well as 2 RS775's and another mini-CIM for a mechanism.

[Sperkowsky]

5 Cims 2 Mini cims. We were originally using 6 cims 2 mini cims and 2 bags but we abandoned a mechanism.

[Type]

6 cims, 2 mini cims and a 775

[Mineboy2300]

We are using 4 cims for our drive train, a mini cim for our intake, and 2 banebots (or servos if we get them working) for our arm.

[Boltman]

6 Sim, 5 other

[MrJohnston]

Currently 4, but we have a couple of mechanisms that might need a little more power than the current motors, so it could very well be six by the end of the week....

There have been a few times that we have put six on our drive train....

[MrJohnston]

Originally Posted by MrJohnston

Currently 4, but we have a couple of mechanisms that might need a little more power than the current motors, so it could very well be six by the end of the week....

There have been a few times that we have put six on our drive train....

I think we have a total of 13 motors....

[Chris is me]

4 CIMs 3 mini 3 BAG. That's the whole thing.

[dradel]

4 cims, 2 775 pro, 1 snowblower motor, 1 window motor, and if it works out 2 bag motors

[JacobD]

4 Mini-cims 2 cims 2 bags and a pg71

You can imagine the power draw

[Bob Steele]

6 CIMS (drive train)
2 MiniCIMS
8 775 Pros