|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
PCM output LED not lighting
We are trying to use Pneumatics for the first time and believe we have the PCM wired correctly. When enabled we have the strobe flashing green light on status but none of the output Solenoid LED's under the ports will light up. Any ideas as to the issue, Coding? Wiring? or possibly a dead PCM...
we have 24V Festa Double solenoids and switched the PCM to 24V bridge, but cannot send voltage to the outputs anyone have similar issues. Thanks for your help/insight |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|