|
|
|
 Students, mentors, schools, corporations, teams, and communities - they are all critical to the success of FIRST.
. - dlavery [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Students, mentors, schools, corporations, teams, and communities - they are all critical to the success of FIRST.
. - dlavery [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Using the ADXL345
I cant find any links that are not broken in reference to the KOP accelerometer from a few years back. I was going to use a gyro but drift is to irritating to compensate for, so a digital accelerometer is the next best thing. Does anyone know how to program for these ( no examples could be found in this years software) and how to wire it? I see a 0v SDA and SCL and 5v, how is this wired?
 EDIT: I found an up to date 2016 screensteps page, but it still has broken links to the wiring page. the I2C has a 3.3v port and the accel I have says 5v on it, will this work? Also my electrical guy thinks I can use this accelerometer to measure angle. Is this true? Last edited by fireXtract : 02-16-2016 at 10:29 AM. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode