775 pro shield

[JesseK]

This is definitely something we're interested in! I'm concerned that the part looks like it closes off the 4 rear vent holes on the very back of the 775. Is this actually the case (no pun intended)?

[Masterofbuttons]

They're hard to see but there are holes in the part right over the vent ports so it doesn't block ventilation

[mastachyra]

This is awesome! I'm so grateful that you shared the file. We might use this if the EkoCycle can print them well. Are you soldering the wires onto the terminals or using a connector? I guess the connectors might not fit into the case.

Thanks!

[JesseK]

Cool, we'll get some 3D printed then. Thanks for saving us a bit of design work this weekend

[Masterofbuttons]

Our team has been soldering short cables on, then attaching that with a connector other things, we printed ours out with an EkoCycle too!

[abross]

This is an awesome idea. Thanks for the post and files!

[Bob Steele]

Wow
You just took something off my list of things to do!!

Thanks a bunch for sharing!!

[IndySam]

Awesome, thanks.

Now if someone would just design an adjustable mount for a AndyMark Hall sensor I would be set

[Jacob Bendicksen]

I just got a quote on Shapeways.com - about $15 per shield + $5 for shipping, delivery by March 3rd.

Not a bad investment if your 3D printer's being annoying.