|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Can a compressor run during the match?
You're fine, again kinda a noob question and we really didn't know much about pneumatics, and I didn't realize it was also written in the code. We were talking about the compressor with tanks.
Thank you though, still helpful to clear it up. |
|
#2
|
||||
|
||||
|
Re: Can a compressor run during the match?
You can run a compressor during the match, but only if you are stationary. You can't be moving while you compressor is on. It's too dangerous.
/joke |
|
#3
|
|||
|
|||
|
Re: Can a compressor run during the match?
A couple things you might want to keep in mind:
1. You also have the option of just putting a large number of tanks on your robot and working with a fixed supply of air. Depending on the amount of air you're using, this may / may not be a better solution. 2. Running the compressor during the match has non-negligible current draw. Depending on how many other motors you're running at once, this could be a concern. 3. There's also some vibration from the compressor. Keep this in mind if you have sensors near the compressor. I don't think most teams have issues with these items, but they're good to keep in mind if you're experiencing weird errors. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|