Denso Motors on the Power Distribution board

[rich2202]

Originally Posted by Wendy Holladay

does anyone know what amperage breaker you need to use on the denso window motors?

I have no idea the maximum amperage of the denso window motor.

what slot in the power distribution board they go in?

What ever slot you want that has a breaker of the amperage you want.

what will pass inspection?

Inspection only checks on proper wire size for a given breaker amperage. Inspection does not check whether you can burn out your motor by giving excess amperage, or fry your custom circuits with too much voltage (feeding 12 volts to a 5 volt circuit).

[Mark McLeod]

The Denso window motors draw 20 to 21 amps depending on the handedness, so a 20a breaker would work.