|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
pic: 3452 Chich the Door Teaser
|
|
#2
|
||||
|
||||
|
Re: pic: 3452 Chich the Door Teaser
Note name is still in progress...
|
|
#3
|
||||
|
||||
|
Re: pic: 3452 Chich the Door Teaser
Bumpers?
|
|
#4
|
||||
|
||||
|
Re: pic: 3452 Chich the Door Teaser
They are not on the robot in this picture. We will probably post another that contains them at some point.
|
|
#5
|
||||
|
||||
|
Re: pic: 3452 Chich the Door Teaser
Quote:
Nifty looking robot! Hard to tell if it is ground aluminum or steel for the whole intake structure but either way looks like it could get hit and be fine (an important thing to consider). Good luck to you! |
|
#6
|
||||
|
||||
|
Re: pic: 3452 Chich the Door Teaser
Thanks, you too! We had a practice event today and learned our bumpers will need to be mounted a little differently.
|
|
#7
|
||||
|
||||
|
Re: pic: 3452 Chich the Door Teaser
Cool bot, does that arm extend more than 15 inches from the frame perimeter when taking in boulders? It looks very close.
|
|
#8
|
||||
|
||||
|
Re: pic: 3452 Chich the Door Teaser
In this picture it extended beyond 15", I think it was 19" but we shortened it down so it didn't exceed the rules.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|