Cad file for Aluminum Pulleys for rhino tread

[KingArthur]

My team was wondering if anyone has a cad file for aluminum pulleys? We have a company that is willing to CNC them for us, however the files must be submitted by this afternoon.

[Chak]

Just go to Andymark's page for the Rhino module, go under the downloads tab, and download the STEP file. You can open the STEP and only take the pulley you want (at least I can on Solidworks, don't know about other CAD software but there should be similar functionality).
You might want to check with your sponsor to see if STEP files are ok though.

[B95]

I hope I am not too late, but I noticed there were some inconsistencies with the Andymark provided CAD file when I used it, those inconsistencies being that the holes (to mount the two halves together) do not line up so that the teeth on either half also line up; they are misaligned. This could either be just an error on my end, or an error in Andymark's own file. I would suggest checking it to make sure the halves line up, regardless.