|
|
|
 But I suppose friendly reminders to read the manual are much better than sarcastic ones. - dtengineering [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| But I suppose friendly reminders to read the manual are much better than sarcastic ones. - dtengineering [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
22-02-2016, 16:36
|
|||
|
|||
|
Re: Electronics Board Help
Good luck.
RoboRio, PDP, PCM, VRM, motor controllers, and Radio? Where is your Battery? How much Vertical space do you have? All our electronics are mounted vertically this year. We actually have two panels, one on each side of the robot that runs parallel with the wheels. Looks like you could fit the roborio on one side, and the PDP on the other. everything else might fit in the black squiggly space. Or, you can do some horizontal layers. Make sure your PDP is on top for inspection. Last edited by rich2202 : 22-02-2016 at 16:40. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode