|
|
|
 I believe it is healthy to leave FIRST at some point and carry on with a well-rounded life (family, fun, school, & work). Focus your creative energy on developing your skills as a professional; then, come back to FIRST as a mentor later down the line. - Erin Rapacki [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: How to wire 12v lights
No Power
No Lights |
|
#2
23-02-2016, 19:16
|
|||
|
|||
|
Re: How to wire 12v lights
Have you confirmed that the lights actually work? While the robot is off, try connecting the positive end of the light to the positive terminal on a battery, and vice versa for negative. If that works, try checking the 12V output on your VRM using a multimeter. It would also help if you could post a picture of your wiring.
|
|
#3
23-02-2016, 19:53
|
|||
|
|||
|
Re: How to wire 12v lights
Yes, we've confirmed that the lights work but not wired through the voltage regulation module. They work in the PDP.
Last edited by zeldathegood : 23-02-2016 at 20:56. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
