Deploy Error... Permission denied

[carrud]

Using Eclipse c++.
Getting Permission Denied while trying to deploy code.

The following has happenned consistently 5 times.

1) Load firmware on RoboRIO
2) Image the RoboRIO
3) Deploy code. The first time I deploy code I get the following. Every time after the first time I get the error down lower in this msg.

-----------------------------------------------------------------------------
Buildfile: C:\Users\FRC-2637\workspace\StrongholdFinal_Without_NavX\build. xml
Trying to override old definition of task classloader
get-target-ip:
[echo] Trying Target: roboRIO-2637-FRC.local
[echo] roboRIO found via mDNS
dependencies:
[echo] roboRIO image version validated
deploy:
[sshexec] Connecting to roboRIO-2637-FRC.local:22
[sshexec] cmd : rm -f /home/lvuser/FRCUserProgram
[echo] [athena-deploy] Copying code over.
[scp] Connecting to roboRIO-2637-FRC.local:22
[scp] done.
[sshexec] Connecting to roboRIO-2637-FRC.local:22
[sshexec] cmd : killall -q netconsole-host || :
[scp] Connecting to roboRIO-2637-FRC.local:22

BUILD FAILED
C:\Users\FRC-2637\wpilib\cpp\current\ant\build.xml:78: server indicated an error: scp: /home/lvuser//robotCommand: Permission denied

Total time: 6 seconds

-----------------------------------------------------------

Every subsequent deploy after the first deploy gives me the following

--------------------------------------------------------------
Buildfile: C:\Users\FRC-2637\workspace\StrongholdFinal_Without_NavX\build. xml
Trying to override old definition of task classloader
get-target-ip:
[echo] Trying Target: roboRIO-2637-FRC.local
[echo] roboRIO found via mDNS
dependencies:
[echo] roboRIO image version validated
deploy:
[sshexec] Connecting to roboRIO-2637-FRC.local:22
[sshexec] cmd : rm -f /home/lvuser/FRCUserProgram
[sshexec] Could not chdir to home directory /home/lvuser: Permission denied
[sshexec] rm: can't stat '/home/lvuser/FRCUserProgram': Permission denied
[sshexec] Remote command failed with exit status 1
[echo] [athena-deploy] Copying code over.
[scp] Connecting to roboRIO-2637-FRC.local:22

BUILD FAILED
C:\Users\FRC-2637\wpilib\cpp\current\ant\build.xml:67: com.jcraft.jsch.JSchException: Could not send 'C:\Users\FRC-2637\workspace\StrongholdFinal_Without_NavX\Debug\ FRCUserProgram' to '/home/lvuser' - 3: Permission denied

Total time: 3 seconds
----------------------------------------------------------


Any thoughts, please???