Pneumatic Regulators from Automation Direct

[rfolea]

... and as a friendly reminder - look in your KOP for the Automation Direct Voucher instructions ( or go here).

It's valid through Championships (April 30th, actually).

You can order anything you want from Automation Direct's 20,000 part inventory using the $30 voucher. Pneumatics, crimp lugs, tools, safety glasses, sensors/encoders, pulleys/belts/shaft couplers, etc.

And since most of the pneumatic parts mentioned are under $30, well ... you do the math.

Shipping is a flat $6 (not included in the voucher), but if you purchase $49 worth of stuff beyond the Voucher, Shipping s FREE via Fed-ex 2-day. We have Canadian and California teams tell us they get stuff faster from ADC than if they order from local suppliers!

We are pushing this because the more teams use it, the more we will be able to influence next years contribution to FIRST ...

So consider this a gentle nudge to get the word out ... Thanks!

[Chris_Elston]

Originally Posted by rfolea

... and as a friendly reminder - look in your KOP for the Automation Direct Voucher instructions ( or go here).

It's valid through Championships (April 30th, actually).

You can order anything you want from Automation Direct's 20,000 part inventory using the $30 voucher. Pneumatics, crimp lugs, tools, safety glasses, sensors/encoders, pulleys/belts/shaft couplers, etc.

And since most of the pneumatic parts mentioned are under $30, well ... you do the math.

Shipping is a flat $6 (not included in the voucher), but if you purchase $49 worth of stuff beyond the Voucher, Shipping s FREE via Fed-ex 2-day. We have Canadian and California teams tell us they get stuff faster from ADC than if they order from local suppliers!

We are pushing this because the more teams use it, the more we will be able to influence next years contribution to FIRST ...

So consider this a gentle nudge to get the word out ... Thanks!

I can never get this voucher to work for my team. I think because there is some wacky bug when I login as my company Automation Direct account, it doesn't accept the voucher or something. Is there a clear process for how to use the voucher and if you can login with an existing Automation Direct account? Or should a setup a SEPARATE AD account to use the voucher?

[Paul Copioli]

Originally Posted by Chris_Elston

I can never get this voucher to work for my team. I think because there is some wacky bug when I login as my company Automation Direct account, it doesn't accept the voucher or something. Is there a clear process for how to use the voucher and if you can login with an existing Automation Direct account? Or should a setup a SEPARATE AD account to use the voucher?

Chris,

I had to use a separate, personal account and it worked fine.

Paul

[only1chip]

The voucher instructions are here:

http://www.firstinspires.org/node/5621

The voucher should work with any account. PM me with your team number and AutomationDirect account number if you continue to have issues...

Chip

[only1chip]

Woot, Woot!!!

A BIG THANKS TO FIRST for clarifying the rules to 'officially' allow the use of our excellent (and super lightweight) regulator!

To celebrate, AutomationDirect would like to give way 10 sets of the regulator and matching gauge to 10 deserving FRC teams:

PRU14 REGULATOR 15-120 PSI 1/4in TUBE CONNECTIONS INLINE $20.25
PGU14 PRESSURE GAUGE 0-170 PSI 1/4in TUBE CONNECTIONS INLINE $17.75


So, the first 10 teams to tell us the following three things (in this thread) will win the parts:

1. How much weight could these parts save on your robot? Be as exact as possible, don’t forget the brass fittings that are no longer needed. We list the ‘packaged weight’ of the two parts above at 0.1lbs each – but I expect there is some rounding error there – maybe someone here on CD can help with a more exact figure??

2. What other AutomationDirect parts have you used on an FRC Robot (this year or previous)? Please include a link to the part on our webstore.

3. Your shipping address (if you are uncomfortable posting this publicly – you can PM me)


Please note that IF you haven’t used your AutomationDirect $30 voucher yet (instructions are here) – THEN you could actually purchase this same pair of parts for only $8 plus shipping. See Rick’s post above to learn how to qualify for our FREE two-day FedEx shipping.

And note that ALL voucher orders include a FREE tubing cutter… great for getting a clean, square cut on your pneumatic tubing, and preventing leaks!

THANKS AGAIN FIRST!

Chip

[Michael Corsetto]

Originally Posted by only1chip

1. How much weight could these parts save on your robot? Be as exact as possible, don’t forget the brass fittings that are no longer needed. We list the ‘packaged weight’ of the two parts above at 0.1lbs each – but I expect there is some rounding error there – maybe someone here on CD can help with a more exact figure??

2. What other AutomationDirect parts have you used on an FRC Robot (this year or previous)? Please include a link to the part on our webstore.

3. Your shipping address (if you are uncomfortable posting this publicly – you can PM me)

1. We are saving ~ .6 lbs by using two PGU14 and one PRU14. Even more important, we are saving lots of space with these parts. Thank you!

2. We are using the "U" shaped adapters to connect the above regulators and gauges into a tight block. TU14

We also use tube from automation direct (both 1/4" for typical runs and 5/32" tubing for runs that require a smaller bend radius)

We also use a myriad of push to connect fittings from Automation Direct

Automation Direct is one of our go-to suppliers, we probably spend $300-$500 on Automation Direct products annually.

3. I'll PM you address.

Thanks!

-Mike

[Brandon Holley]

Originally Posted by Michael Corsetto

1. We are saving ~ .6 lbs by using two PGU14 and one PRU14. Even more important, we are saving lots of space with these parts. Thank you!

2. We are using the "U" shaped adapters to connect the above regulators and gauges into a tight block. TU14

We also use tube from automation direct (both 1/4" for typical runs and 5/32" tubing for runs that require a smaller bend radius)

We also use a myriad of push to connect fittings from Automation Direct

Automation Direct is one of our go-to suppliers, we probably spend $300-$500 on Automation Direct products annually.

3. I'll PM you address.

Thanks!

-Mike

1. We could save approximately 1 pound by removing all of the brass on our antequated pneumatic setup...

2. We have been using these for our prototype shooter- high Cv solenoids that are super cheap compared to others we've used in the past. More air, MORE POWER!

1.0/AM-526 MANIFOLD 6-STATION FOR AVS-52 SERIES VALVES ALUM
4.0/AM-52BP BLANKING PLATE FOR AM-52 SERIES MANIFOLDS STEEL
6.0/AVS-5211-24D VALVE 4-WAY 2-POS Cv=0.78 24VDC 1/8in FNPT SPOOL SGL-SOL ALUM
3.0/AVS-5221-24D VALVE 4-WAY 2-POS Cv=0.78 24VDC 1/8in FNPT SPOOL DBL-SOL ALUM


3. I will PM you!


-Brando

[AllenGregoryIV]

Originally Posted by only1chip

So, the first 10 teams to tell us the following three things (in this thread) will win the parts:

1. How much weight could these parts save on your robot? Be as exact as possible, don’t forget the brass fittings that are no longer needed. We list the ‘packaged weight’ of the two parts above at 0.1lbs each – but I expect there is some rounding error there – maybe someone here on CD can help with a more exact figure??

2. What other AutomationDirect parts have you used on an FRC Robot (this year or previous)? Please include a link to the part on our webstore.

3. Your shipping address (if you are uncomfortable posting this publicly – you can PM me)

1. We would save around ~.8 lbs removing a norgen regulator, two gauges, and several brass T fittings.

2. We use Automation direct clear tubing,
Several push connect fittings, we always you your push connect plugs. We have used your solenoids in the past and their is one mounted on our competition robot right now but may be changed, not sure yet. We have also used your cylinders before as well, very happy you all added STEP files for a lot more of your parts now, this is great for quickly testing in CAD before making purchases.

3. Allen Gregory
St. Agnes Academy
9000 Bellaire Blvd
Houston, TX, 77036

Thanks Automation Direct you all are awesome.

[Greg Needel]

Originally Posted by only1chip

Woot, Woot!!!

A BIG THANKS TO FIRST for clarifying the rules to 'officially' allow the use of our excellent (and super lightweight) regulator!

To celebrate, AutomationDirect would like to give way 10 sets of the regulator and matching gauge to 10 deserving FRC teams:

PRU14 REGULATOR 15-120 PSI 1/4in TUBE CONNECTIONS INLINE $20.25
PGU14 PRESSURE GAUGE 0-170 PSI 1/4in TUBE CONNECTIONS INLINE $17.75


So, the first 10 teams to tell us the following three things (in this thread) will win the parts:

1. How much weight could these parts save on your robot? Be as exact as possible, don’t forget the brass fittings that are no longer needed. We list the ‘packaged weight’ of the two parts above at 0.1lbs each – but I expect there is some rounding error there – maybe someone here on CD can help with a more exact figure??

2. What other AutomationDirect parts have you used on an FRC Robot (this year or previous)? Please include a link to the part on our webstore.

3. Your shipping address (if you are uncomfortable posting this publicly – you can PM me)

1.We would save 1.2 lbs as we are running a 3 pressure system with 2 regulators.

2. We have been buying all of our quick connect tubing fittings from automation direct because they are cheaper and lighter than the ones from mcmaster

3. I'll PM you

[NickE]

Originally Posted by only1chip

Woot, Woot!!!

A BIG THANKS TO FIRST for clarifying the rules to 'officially' allow the use of our excellent (and super lightweight) regulator!

To celebrate, AutomationDirect would like to give way 10 sets of the regulator and matching gauge to 10 deserving FRC teams:

PRU14 REGULATOR 15-120 PSI 1/4in TUBE CONNECTIONS INLINE $20.25
PGU14 PRESSURE GAUGE 0-170 PSI 1/4in TUBE CONNECTIONS INLINE $17.75


So, the first 10 teams to tell us the following three things (in this thread) will win the parts:

1. How much weight could these parts save on your robot? Be as exact as possible, don’t forget the brass fittings that are no longer needed. We list the ‘packaged weight’ of the two parts above at 0.1lbs each – but I expect there is some rounding error there – maybe someone here on CD can help with a more exact figure??

2. What other AutomationDirect parts have you used on an FRC Robot (this year or previous)? Please include a link to the part on our webstore.

3. Your shipping address (if you are uncomfortable posting this publicly – you can PM me)

Chip,

1. We'll save around 0.5lb. The smaller size is just as important and may allow for some minor reconfiguration of the pneumatic components and shortening of tubes, which would be nice.
2. We're expecting a few pneumatic cylinders to arrive in the mail today from AD...
3. Will PM you an address.

Thanks AD!

[Knufire]

Chip,

1. We'll be saving about 0.7lbs, but a LOT of space. We're also using a bunch of heavy brass connectors in this area of the robot.

2. We've actually been using more sensors from AD than pneumatic components. Specifically: http://www.automationdirect.com/adc/...es)/QMRB-0N-0A

3. I'll PM you!

[jwfoss]

Originally Posted by only1chip

Woot, Woot!!!

A BIG THANKS TO FIRST for clarifying the rules to 'officially' allow the use of our excellent (and super lightweight) regulator!

To celebrate, AutomationDirect would like to give way 10 sets of the regulator and matching gauge to 10 deserving FRC teams:

PRU14 REGULATOR 15-120 PSI 1/4in TUBE CONNECTIONS INLINE $20.25
PGU14 PRESSURE GAUGE 0-170 PSI 1/4in TUBE CONNECTIONS INLINE $17.75


So, the first 10 teams to tell us the following three things (in this thread) will win the parts:

1. How much weight could these parts save on your robot? Be as exact as possible, don’t forget the brass fittings that are no longer needed. We list the ‘packaged weight’ of the two parts above at 0.1lbs each – but I expect there is some rounding error there – maybe someone here on CD can help with a more exact figure??

2. What other AutomationDirect parts have you used on an FRC Robot (this year or previous)? Please include a link to the part on our webstore.

3. Your shipping address (if you are uncomfortable posting this publicly – you can PM me)


Please note that IF you haven’t used your AutomationDirect $30 voucher yet (instructions are here) – THEN you could actually purchase this same pair of parts for only $8 plus shipping. See Rick’s post above to learn how to qualify for our FREE two-day FedEx shipping.

And note that ALL voucher orders include a FREE tubing cutter… great for getting a clean, square cut on your pneumatic tubing, and preventing leaks!

THANKS AGAIN FIRST!

Chip

1. This year we'll be saving at least 1lbs thanks to using the Automation Direct Components.

2. We currently have the AR-213 on both our competition robot and the practice bot, and we have some PRU14 and PGU14 downstream to regulate our intake actuation.

3. Will PM you the Address.

Thanks!

[Peter Johnson]

Originally Posted by only1chip

So, the first 10 teams to tell us the following three things (in this thread) will win the parts:

1. How much weight could these parts save on your robot? Be as exact as possible, don’t forget the brass fittings that are no longer needed. We list the ‘packaged weight’ of the two parts above at 0.1lbs each – but I expect there is some rounding error there – maybe someone here on CD can help with a more exact figure??

2. What other AutomationDirect parts have you used on an FRC Robot (this year or previous)? Please include a link to the part on our webstore.

3. Your shipping address (if you are uncomfortable posting this publicly – you can PM me)

1. We'll save around 0.5 lbs in brass and other fittings.
2. We've not used AD parts before but are definitely planning on using more of them in the future; the pricing and options are great! We were about to place an order when you posted this.
3. Will PM you.

Thanks so much AD for your contributions to the FIRST community and an outstanding pneumatic selection!

[Richard.Varone]

Originally Posted by only1chip

Woot, Woot!!!

A BIG THANKS TO FIRST for clarifying the rules to 'officially' allow the use of our excellent (and super lightweight) regulator!

To celebrate, AutomationDirect would like to give way 10 sets of the regulator and matching gauge to 10 deserving FRC teams:

PRU14 REGULATOR 15-120 PSI 1/4in TUBE CONNECTIONS INLINE $20.25
PGU14 PRESSURE GAUGE 0-170 PSI 1/4in TUBE CONNECTIONS INLINE $17.75


So, the first 10 teams to tell us the following three things (in this thread) will win the parts:

1. How much weight could these parts save on your robot? Be as exact as possible, don’t forget the brass fittings that are no longer needed. We list the ‘packaged weight’ of the two parts above at 0.1lbs each – but I expect there is some rounding error there – maybe someone here on CD can help with a more exact figure??

2. What other AutomationDirect parts have you used on an FRC Robot (this year or previous)? Please include a link to the part on our webstore.

3. Your shipping address (if you are uncomfortable posting this publicly – you can PM me)


Please note that IF you haven’t used your AutomationDirect $30 voucher yet (instructions are here) – THEN you could actually purchase this same pair of parts for only $8 plus shipping. See Rick’s post above to learn how to qualify for our FREE two-day FedEx shipping.

And note that ALL voucher orders include a FREE tubing cutter… great for getting a clean, square cut on your pneumatic tubing, and preventing leaks!

THANKS AGAIN FIRST!

Chip

1) We'll save ~1lb using these components but like the others have stated, the space is just as big if not even more important then the weight!

2) PLUG14, PU14YEL100, PU14RED100, TC-12

3)Will PM

[ShaneP]

Originally Posted by only1chip

1. How much weight could these parts save on your robot? Be as exact as possible, don’t forget the brass fittings that are no longer needed. We list the ‘packaged weight’ of the two parts above at 0.1lbs each – but I expect there is some rounding error there – maybe someone here on CD can help with a more exact figure??

2. What other AutomationDirect parts have you used on an FRC Robot (this year or previous)? Please include a link to the part on our webstore.

3. Your shipping address (if you are uncomfortable posting this publicly – you can PM me)

Chip

Hello Chip,

1. We will save around .6 lbs switching to these pneumatic components
2. We have used these solenoids for higher flow rates on our pneumatic shooter in 2014: AVS-5211-24D and these other components TU14, UT14, UY14, HVU14-2.
3. Will PM you. Thanks!