pic: FRC 4329 Presents Trogdor

[Ryan Dognaux]

Originally Posted by 1493kd

Take two cylinders of the same stroke that equal the stroke you currently have and mount them opposite each other, you now have a 3 position cylinder. If they are two diffrent strokes that equal the orginal stroke you have 4 positions. We switched our motor driven intake/shooter to a system like this and its is magic.

PM me if you want more info/pictures

All thanks go to Brian from 2791 for introducing this to me

So a big thanks to Brent & 1493 here. With his advice we were able to get our 3 intake positions by using 2 large actuators and one small helper actuator. You can see our initial test here: https://youtu.be/1D2Iy8q8ayA We need a slightly longer actuator to bring it back up to full vertical but other than that we're very happy with it.

[Chris Endres]

Originally Posted by Ryan Dognaux

So a big thanks to Brent & 1493 here. With his advice we were able to get our 3 intake positions by using 2 large actuators and one small helper actuator. You can see our initial test here: https://youtu.be/1D2Iy8q8ayA We need a slightly longer actuator to bring it back up to full vertical but other than that we're very happy with it.

Looks familiar .

[Ryan Dognaux]

Originally Posted by Chris Endres

Looks familiar .

If we've made anything that looks similar to Wildstang then we must be doing something right See you guys week 5 in Chicago!