Al's 2016 Inspection Thread

And then, at the end of the match, the drive teams who are being lifted all say at once (in a GOVERNATOR voice)- "GET TO ZE CHOPPER!!!" - Graham Donaldson [more]

		Chief Delphi > FIRST > General Forum
Al's 2016 Inspection Thread

Thread Tools

Rate Thread

Display Modes

#19

08-03-2016, 15:59

rsisk

The GURU Channel

AKA: Richard Sisk

FRC #2493 (Robokong)

Team Role: Mentor

Join Date: Jan 2008

Rookie Year: 2007

Location: Riverside, CA

Posts: 2,746

Re: Al's 2016 Inspection Thread

Quote:

Originally Posted by dradel

Shall I take it no one wants to make an actual ruling on this?

I would rule it has to be on the high pressure side based on R78.

R78 If pneumatic COMPONENTS are used, the following items are required as part of the pneumatic
circuit and must be used in accordance with this section, as illustrated in Figure 4-15.

Figure 4-15 shows the dump valve on the high pressure side of the system.

__________________

Quote:

The views expressed are mine and should not be construed to represent the views of anyone else.

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 15:37.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.