Team 254 Presents: Dropshot

[pilleya]

Originally Posted by tickspe15

I see an unused bearing hole. Something's missing...

There is a gearbox with at least one 775pro that doesn’t seem to be doing much…it seems a reasonably high reduction as well.

If you look closely through the smoked polycarbonate, there is a run of what looks like #25 chain which seems to be coming from somewhere near one of the drive gearboxes, this could potentially be the output from a Power Take Off( PTO), which the Poofs have had experience using to climb in different games.

Also on their website it says the robot is "94.5 lbs (as pictured)" so 94.5 lbs may not be the final weight after some other things have been added

Also here is a higher resolution image of the robot, to assist with over analysis:
https://media.team254.com/2016/03/86bb0776-2016.jpg