|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
pic: Oops.
|
|
#2
|
||||
|
||||
|
Re: pic: Oops.
Is there video of this? (currently looking now, I think Dr. Joe would enjoy it).
|
|
#3
|
||||
|
||||
|
Re: pic: Oops.
Here's a couple similar from our matches at Los Angeles
Quals 41: https://youtu.be/genyV1Pljwc?t=51s watch the robot starting on the left. QF2-3: https://youtu.be/YHDG6jRnkQw?t=1m25s we're the blue team in the middle. Don't quite make it over the rampart ![]() |
|
#4
|
||||
|
||||
|
Re: pic: Oops.
One nice feature of low bar robots is that they have a nice flat surface upon which they can lay upside down.
|
|
#5
|
||||
|
||||
|
Re: pic: Oops.
"No really guys, it's a design feature."
|
|
#6
|
|||
|
|||
|
Re: pic: Oops.
I'll raise you a triple Quarterfinal Tortuga in CVR
https://youtu.be/KBg4DSRBQlc?list=PL...kWp0-4V78CASeD |
|
#8
|
||||
|
||||
|
Re: pic: Oops.
Quote:
Not an issue for us though, we have a very low centre of gravity through only having about 5mm of ground clearance |
|
#9
|
|||||
|
|||||
|
Re: pic: Oops.
This picture makes me glad we decided to be able to flip our robot back on the right side when we tip over
![]() |
|
#10
|
|||||
|
|||||
|
Re: pic: Oops.
Yes, you do. When the intake arm is lowered, the top is pretty flat. Nice robot though!
Here's a gif of ours: ![]() |
|
#11
|
|||||
|
|||||
|
Re: pic: Oops.
We flipped again in the finals of the Arizona West Regional after being rammed by 3853, continuing our record of never losing a regional on our wheels. We hope to make it to Einstein finals before we flip again.
![]() |
|
#12
|
||||
|
||||
|
Re: pic: Oops.
Quote:
no one likes a squashed turretLast edited by pilleya : 10-04-2016 at 18:54. |
|
#13
|
||||
|
||||
|
Re: pic: Oops.
are we posting gifs of robots falling over? I can do that too!
![]() |
|
#14
|
||||
|
||||
|
Re: pic: Oops.
Hmm do robot's eye view count? We had a GoPro on when we flipped.
Although I was hoping not to put the "If you can read this roll me over" sticker to use. ![]() |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|