|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
pic: 3D Printed Parts Contest
Last edited by MailmanDelivers : 01-04-2016 at 16:29. Reason: Clarity |
|
#2
|
|||
|
|||
|
Re: pic: 3D Printed Parts Contest
Unsure why this uploaded sideways. If you click it the picture is oriented correctly.
|
|
#3
|
||||
|
||||
|
Re: pic: 3D Printed Parts Contest
It probably has to do something with this: http://rotatemailer.com/sideways-pictures.html
|
|
#4
|
||||
|
||||
|
Re: pic: 3D Printed Parts Contest
Is it just me or are elegance of the solution and complexity opposites? To me, the most elegant solution this the least complicated one that gets the job done.
|
|
#5
|
|||
|
|||
|
Re: pic: 3D Printed Parts Contest
The coolest 3D printed parts I've seen this year are 1965's tank tread's. They talked about them in this thread, but I don't think they check CD much. You might want to PM ColmP, and see if they want to submit.
|
|
#6
|
||||
|
||||
|
Re: pic: 3D Printed Parts Contest
Does it have to be team? Can I post something I made on my personal printer? I would imagine not though.
|
|
#7
|
||||
|
||||
|
Re: pic: 3D Printed Parts Contest
Quote:
*It'd have to be pretty good to beat mine |
|
#8
|
||||
|
||||
|
Re: pic: 3D Printed Parts Contest
Spot the printed parts
![]() |
|
#9
|
||||
|
||||
|
Re: pic: 3D Printed Parts Contest
On our 2014 robot, we had these cylinder cartridges that were used to hold down our throwing arm(energy stick). They worked ok, but we printed out more just to be safe.
|
|
#10
|
||||
|
||||
|
Re: pic: 3D Printed Parts Contest
125 is gonna win this one.
2791 has a few cool 3D printed parts too - gearbox covers, a ball cradle, linkages, etc. |
|
#11
|
|||||
|
|||||
|
Re: pic: 3D Printed Parts Contest
You say that and yet you haven't seen 3824's robot. For those of you that don't know they use an almost entirely 3D printed robot. I don't think they 3D printed everything this year, but I could hazard a guess it's still a lot.
|
|
#12
|
|||
|
|||
|
Re: pic: 3D Printed Parts Contest
Just to answer a few questions:
You can submit parts for any FRC Game, preferably this year or last years game - sorry, no personal parts! To further explain one rule, "Teams may only submit once", it's to prevent duplicate entries of the same exact part. Teams may enter multiple parts. Don't forget to send an email to Contest3D@Ligerbots.com to submit your part or part(s). |
|
#13
|
||||
|
||||
|
Re: pic: 3D Printed Parts Contest
Thanks for the honorable mention. After our printed frame cracked week 1 we knew we had to step away, regrettably, from all printed robots. We had a few printed parts for our pickup mechanism but they didn't survive Palmetto. We still have no metal though... All pultruded fiberglass. Fell in love with the stuff. Light and durable.
|
|
#14
|
|||||
|
|||||
|
Re: pic: 3D Printed Parts Contest
Quote:
|
|
#15
|
||||
|
||||
|
Re: pic: 3D Printed Parts Contest
Quote:
http://www.strongwell.com It's what fiberglass ladders are made of. You can get all sorts of shapes, tubes, sheets, plates... You can drill and cut it like aluminum. It has a high, but directional, specific strength. You can see some of the parts, as well as some printed parts, on our reveal video. http://youtu.be/nC5Jw_LQt9I If anyone wants to see our printed bots, they are in this years Behind The Design book. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|