|
Re: Analog Pressure Sensor Labview Programming
Quote:
Originally Posted by s5511
I used the Get Voltage.Vi and plugged the output into the Volts to PSI.vi, and printed that value, but now I am getting values between -.5 and -.3... Is there anything that I could be doing wrong? The yellow wire on the sensor is plugged into the Signal port on the roboRIO's Analog 0 port.
|
What are the three colors of the wire? It could be possible that the wire is flipped the wrong way in the RoboRIO.
__________________
Team Fusion 364 - Driver/Programmer 2012-2015; Controls Mentor 2016-Present
 
|
We'll defintely be working on both the balancing 2 wheel robot, the 6 legged robot, and the wood chassis 8 wheel drive robot ideas this fall. - MrForbes [more] 
03-04-2016, 10:21
Threaded Mode