Vision Problems Under Regional Lights[GRIP]

[team-4480]

Originally Posted by Andrew Schreiber

Try reducing your acceptable Hues. Right now you're pretty much saying "any color" unless you need any color.

I want to contain those values, but without the full range, the contour I want doesn't show up.

[Andrew Schreiber]

Originally Posted by team-4480

I want to contain those values, but without the full range, the contour I want doesn't show up.

See comments about manual exposure.

Another option would be to, on the rio, check the aspect ratios of the contours. But that'll screw up if you are not straight on. Really the exposure and proper hsv bands are the best way to eliminate gunk.

[RufflesRidge]

Originally Posted by team-4480

I want to contain those values, but without the full range, the contour I want doesn't show up.

That means you are either using a white light or your image is overexposed. Turning down the exposure or using a filter/sunglasses should help if you are using a colored light. Then you can dial in the hue to knock out the venue lighting.