need a vexpro 20 toth gear for championships

[pilleya]

http://www.chiefdelphi.com/forums/sh...&highlight=775

This thread talked about possible solutions. As a preventative measure and as a solution you could purchase some 20 tooth steel gears from Andymark and have them hex broached. The steel ones would also be less likely to break again

[techhelpbb]

I think I can get you the gears you need.
Send me a PM.

[techhelpbb]

Anyone else need 20 tooth steel gears with the 1/2" hex broach?

I have 4 more.

[frcguy]

Originally Posted by techhelpbb

Anyone else need 20 tooth steel gears with the 1/2" hex broach?

I have 4 more.

Any chance you or anyone else attending champs have 24 tooth 1/2" hex broach gears? They can be steel or aluminum. After this incident, we need some spares. We should be able to pay retail on them. PM me if you have any.

[techhelpbb]

Originally Posted by frcguy

Any chance you or anyone else attending champs have 24 tooth 1/2" hex broach gears? They can be steel or aluminum. After this incident, we need some spares. We should be able to pay retail on them. PM me if you have any.

I have 2 Vex dual CIM ball shifters.
They have 2 lightly used 24 tooth 3rd stage gears.
Contact me in private if you want these 2 original Vex 24 tooth aluminum gears.
We will work something out, but please try contact me tomorrow before lunch because other gears are going out overnight as well.

I do not have any 24 tooth steel gears suitable to broach for you. Probably going to be tough to get them to me by Tuesday afternoon as well.