Right Angle Adapter for VersaPlanetary Gearbox

[tr6scott]

Originally Posted by s_forbes

Awesome! I'll have to remember that these right angle adapters exist, nice little product.

Instead of broaching, I wonder if using a socket adapter for a drill (like this) and a 1/2" socket would be more feasible for most teams.

Should always read all the way to the end.

You can use this same Dewalt adapter in many other robotics applications.

These are some of the many things we have done:

1. Use a standard 1/2" socket adapter and a bronze bushing to create a 90 degree drive to 1/2" hex.

2. Broach a 1/4" bore XL timing pulley and provide bearing support on both sides of adapter for a compact belt drive solution.

3. Create a small hex-hex plug to adapt standard VexPro Hex-core Sprockets and Gears.

All sorts of other things are also now possible:

The 1/4" hex drive is a universal interface in power tool interfaces. Pivot drives, flex shafts and all sorts of other adapters are now available to use once you have a Versaplanetary gearbox which accepts a 1/4" hex drive.

Good Luck in all your robotic creations!