Go to Post It's amazing what you'll find in the FIRST Manual :) - dcarr [more]
Home
Go Back   Chief Delphi > FIRST > General Forum
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Spotlight this post!  
Unread 22-04-2016, 08:21
Unsung FIRST Hero
Al Skierkiewicz Al Skierkiewicz is offline
Broadcast Eng/Chief Robot Inspector
AKA: Big Al WFFA 2005
FRC #0111 (WildStang)
Team Role: Engineer
 
Join Date: Jun 2001
Rookie Year: 1996
Location: Wheeling, IL
Posts: 10,763
Al Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond repute
Teams coming to Champs

Everyone,
If your team is coming to Champs, please be prepared. Teams can bring in five members to set up the pit at 1:00 PM on Wednesday. General Pit open is at 4:00PM. Check the FIRST Website for further and the latest information.
Team Load in is on 9th Avenue as in the past. After you load in, please try to get your robot crate unpacked ASAP so that it can be removed from the pit area. You can then get inspected as soon as you are able. We will have inspectors walking the pits to assist you once pits open. They will be ready to inspect in that first hour. As always, bring your robot with bumpers off and battery out to the inspection station for weigh and size. An inspector will be assigned after that and will meet you in the pit.
During inspection be prepared to show your attachments, arms and mechanisms that extend outside the frame perimeter. Have your CAW available as a printed form or you can display it on a laptop. Have your driver's station booted and ready to tether to your robot to display firmware and other Power On tests during inspection.

Some of the biggest problems we have encountered this year have been bumpers. This may be due to insufficient frame support behind the bumpers, particularly with tank tread designs. Teams have also misunderstood the 8" rule. The bumper is not the 8" determining factor, it is 8" from any corner as measured along the frame. Refs have been calling fouls on teams for bumpers that sag outside of the bumper zone. Please be sure your covers are tight and your bumpers are securely mounted.

In the final weeks of the season, we have seen more loose connections on the primary electrical system components than anytime previous. To keep your robot from brownout problems and intermittent noise, check that everything is tight. Wiggle all battery cables, main breaker and PDP connections. Give a good tug on all of these wires to check for improper crimp. Take time to properly insulate all terminals as well.

Good Luck Everyone, see you in just four days.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
Reply With Quote
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:09.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi