|
Re: West coast drive with versa frame bumper mounting
Quote:
Originally Posted by asid61
We put blocks in the corners of our bumpers, with a hole going straight down. Then on each corner of the chassis we have a clevis pin-like thing sticking up 1/2" from the neighboring edges of the chassis. Clevis pin goes into blocks in the corner of the bumper, then we stick in a pin. Very fast, very effective, as long as your clevis pins don't break (I recommend 5/16" diameter at least).
|
picture cause i'm not sure what you mean
__________________
Matthew Lantry
Team 4475 2014-present
-College Mentor 2014-????
Team 1676- 2011-2014
-Mechanical 2011-2014, Subteam leader 2013-2014
-Robot Operator 2014
George G. White FLL mentor 2011-2014
“Both optimists and pessimists contribute to our society. The optimist invents the airplane and the pessimist the parachute.”
|
If it were not about winning, it would not be called a competition - but FRC is much more than winning a competition. - JaneYoung [more] 
26-04-2016, 18:50
Threaded Mode