|
|
|
 In FIRST, there's no such thing as too many 1/4-20 bolts, too many bottles of caffeinated beverage, and too much knowledge from others. - Billfred [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| In FIRST, there's no such thing as too many 1/4-20 bolts, too many bottles of caffeinated beverage, and too much knowledge from others. - Billfred [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#13
03-05-2016, 10:07
|
|||
|
|||
|
Re: Stronghold Drivetrain Review
Our redesigned chassis held up very well, it consisted of the following:
-8WD with .160 drop centers -6061 2x1x.125 Tubing except for over wheel rail mounts (1.5x1x.125 Tubing) -WCP SS 6CIM Gearbox modified for #35 chain, non-direct drive, and spacers to solid aluminum/solid delrin with 1/4-20s -WCP Bearing blocks with 1/2" Round Bearings -4140 1/2" steel hex stock turned round through bearings, keyed for sprockets -6" Pneumatic WCP hubs with diamond tread -#35 Chain running on 12T sprockets -Full Wrap Belly Pan Built it once, only maintenance was checking tire pressure. It's safe to say that our first time with our modified WCD was a success and the teams new baseline. Last edited by jwfoss : 03-05-2016 at 10:17. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode