What COTS parts would you like to see?

[marshall]

Originally Posted by Mr V

AndyMark sells this bumper kit for the AM14U3 http://www.andymark.com/AM14U3-p/am-3152.htm Much of that was included in the version shipped as the KOP chassis, it included the right and left angle brackets, the thumb screws and the t nuts. There was also a separate instruction sheet on how to use those parts to create bumpers. It did not include the corner angles but personally I prefer to glue and screw the two pieces together and have found that method to be more than robust enough.

Not what I want. It's not simple enough (And yes, I know how simple it is). Andy knows what I want. He had a 3D printed version of it at champs 2 years ago. Someone at AM should tell him to make it already.

Originally Posted by hrench

a CAN plug-in vision aiming module.

Ain't gonna happen anytime soon for a lot of reasons. Unless of course all you want is the PIXY CAM with a CAN interface... you can make that happen without a whole lot of effort... use the HERO board to do it maybe?

All that being said, 900 is actively talking about how to "cheesecake" vision onto other robots in the future... no idea what that means at the moment but we're talking about it.

The biggest issue with vision isn't the vision or the detection. It's getting more teams to add encoders to their drivetrains and mechanisms. You need feedback to make use of the vision data.

I'd love to see more COTS options for encoder integration.

I would also love to see the CIM-Encoder that AM introduced this season improved. It's hollow and the little center spacer plate isn't square. Make it filled in, more robust, and square the center plate.

And I REALLY hope brushless is coming based on what CTRE was showing off. I'd love to see it happen.