Quote:
Originally Posted by team-4480
Do you mind linking the one you used? That sounds better than using a normal potentiometer!
|
Rotary switches are pretty cheep and easy to use. Here's a 12 position one that would emulate what GreyingJay did:
http://www.digikey.com/product-detai...1NPF-ND/370270
In one of the Launchpad example control panels I wired up an 8 position one. You can see it here to get an idea of how to do it:
http://processors.wiki.ti.com/index....nalog_Wire.JPG
The red and black wire on either end of the resistor chain are +3.3V and gnd, and the one in the middle is the signal out.
You definitely know you've overdosed on first when you wash the aluminum shavings off your hands AFTER you eat dinner. - Maxpower57 [more] 
13-05-2016, 14:27
Threaded Mode