|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
After seeing steering wheel controls (with a joystick as a throttle) implemented on several robots this year, I thought that it would be an interesting offseason project to work on implementing these controls. So, I have a few questions for teams who use this setup:
1. Is this control scheme intuitive? 2. Have you ever used it with a holonomic drivetrain? Did it work well? 3. What steering wheel would you recommend? 4. Are there any programming challenges with this interface? |
|
#2
|
|||
|
|||
|
Re: Considering Steering Wheel Controls
971 wrote about their steering wheel setup here: http://frc971.org/content/programming
|
|
#3
|
||||
|
||||
|
Re: Considering Steering Wheel Controls
This would be interesting to me too: And if you are doing it what's your scheme for mapping the 2 degrees of freedom of wheel/pedal onto the 3 degrees of freedom of forward/sideways/turn? Was there some sort of additional input?
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|