Orange Robot Safety Light

[maxnz]

We used 2 due to the fact that we couldn't see the one from behind. We wired the second one into the first one and that has worked just fine.

[ctt956]

Originally Posted by scca229

I found them here for the low low price of $121.50/ea (thank goodness I'm not in marketing):

http://www.plccenter.com/Buy/Allen%2.../855PBB12ME522

*link is from the same Reddit thread as above.

HOW MUCH?! For an LED???

Originally Posted by timytamy

The only potential issue you may have is the current draw being too high, but with LEDs that would be surprising. (BTW, haven't used the one in the link, but don't see why it wouldn't work)

Originally Posted by maxnz

We used 2 due to the fact that we couldn't see the one from behind. We wired the second one into the first one and that has worked just fine.

If two of the "regulation" lights ran off one port on the Rio, I see no way a normal LED could draw too much current, unless there's a big wiring fault...

[techhelpbb]

I ran into this with my personal robots.
I used to have a place I could get these for $30.
No longer have that option.

Bought the yellow LED replacement for the 2 element car blinker and the surface mount socket. Put a terminal strip on the 3 wires all that cost $20 with some shipping.

Been meaning to 3D print a similar base and use a plastic shot glass to make a similar assembly.