|
|
|
 In real life (IE when you go to apply your engineering skills to tasks in industry) there will be constraints on all sorts of things - many of which may or may not be "fair" or even "intelligent". You must learn to either work around them or use them to your advantage - preferably a bit of both. - OScubed [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#16
20-05-2016, 00:53
|
||||
|
||||
|
Re: Off season T-Shirt Launching Tank Robot
Small update
https://i.imgur.com/SX6I1hK.jpg Side panels came in and we mounted them on the robot. The ones pictured are only the inside ones, there are also a pair of outside ones for more strength. Turret is mostly done but there is still a lot to do with the shooting and loading mechanism. Also notice he parallel battery connector  Night pic with it all together https://i.imgur.com/SNBZ4A0.jpg Closeup of turret angle mechanism https://i.imgur.com/zBtOJYK.jpg Earlier stage of turret https://i.imgur.com/iWklG63.jpg Partially finished turret on robot https://i.imgur.com/lDK5GSd.jpg Should be about another week or so until it is all finished! 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode