Need a good table top scrolling CNC!

...because "someone on ChiefDelphi said so," doesn't fly when your robot can't pass inspection. - Madison [more]

		Chief Delphi > FIRST > General Forum
Need a good table top scrolling CNC!

#32

20-05-2016, 22:27

RoboChair

He who fixes with hammers #tsimfd

AKA: Devin Castellucci

FRC #1678 (Citrus Circuits and 5458 Digital Minds)

Team Role: Mentor

Join Date: Jan 2007

Rookie Year: 2005

Location: Davis, CA

Posts: 639

Re: Need a good table top scrolling CNC!

Quote:

Originally Posted by Fusion_Clint

This would be great, do you have a link to them?

http://www.veloxcncrouters.com/#!pro...c-(tool-qmtc-3)

Or the super cheap option
http://www.amazon.com/Lather-Milling...rds=er16+chuck
downside is that it's a 12mm shank and not 1/2", you just need to cut/grind the shank down to a usable length. I haven't found a 1/2" shank for ER collets that was under $80 but 12mm shank is under $13, it's really weird.

__________________

11 Years and counting! Over a third of my life has been spent with FRC.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 03:45.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.