|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#11
|
||||
|
||||
|
Re: Need some recommendations for tooling
I would put a lathe way up your list of tools.
For your budget, I would suggest this Lathe with Tool stand. This size lathe could really accomplish any future machining needs you might have. With a lathe you can quickly make custom drivetrain axles, make spacers, Standoffs, etc. I would also order additional tooling including: Typical carbide cutting tools Cutoff tool Grooving tool (multi-blade set) for E-clips and C-clips A Drill and Tap set If you don't have a micrometer and calipers already, I'd add that to the list as well. I've ordered tooling from www.use-enco.com in the past, and can recommend them. Last edited by InFlight : 09-06-2016 at 15:05. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|