|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating:
|
Display Modes |
|
#4
|
||||
|
||||
|
Re: pic: Another Belt-In-Tube Drivetrain
2 inch square .125 wall 6061-T6 is readily available ( On-line Metals, et al). Seems like this would eliminate machining of cots parts, and potential rubbing of the belts.
It seems like many teams just use 1.5x2, but there's no need to constrain yourself to it. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|