roboRIO connection issues

[Graith]

I've recently switched laptops to use with our competition robot, I can't connect to it with wireless and am having trouble pinpointing the problem.

I re-imaged and updated firmware on the roborio and downloaded the NI FRC Update Suite, I ran the FRC bridge/radio config and disabled windows firewall.

I am able to connect to the robot with USB and can ping both roborio-3238-frc.local and 172.22.11.2 successfully.

All the lights on the radio are on and the wireless network appears on available networks.

I connected Ethernet to the radio with DHCP and am able to ping the Ethernet IPv4 and DNS but not the roborio-3238-frc.local, driver station says no robot communication when I'm connected with Ethernet and/or USB.

When I connect to the rio wirelessly with IPv4 config set to 10.32.38.(1-5) or with DHCP driver station says no robot communication.

Forgive me if I missed something obvious in the troubleshooting guide, I'm going to take a fresh look at this tomorrow but I'd appreciate any help. I don't have the other laptop with me unfortunately (it's locked at our school) but will have access to it Saturday.