|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#6
|
||||
|
||||
|
Re: 3d Model Generators
Quote:
-Use the VexPro gear sizes to create a generator to automatically build a single speed gearbox plate. You can safely use the input as a CIM because there are already a decent number of ways to convert to the CIM mounting form factor. -Double down and and make a double reduction generator... gets more complicated though. -Generate a complete gearbox. -Generator to punch a 1/2" hex hole completely through any arbitrary location. Why? Because 1/2" hex! -Generator to build an arbitrarily sized WCD chassis based on known chain lengths and gearboxes. -Alright, big one... take the JVN calculator spreadsheet and turn out generators for everything in that spreadsheet to make 3d versions of all of it using parts from VexPro and AM. -Generator for arms of varying lengths would be cool... take a look at the Greybots RAMP videos... they do this with a side profile of a robot to get heights and stuff... it is neato and saves on whiteboard time when done right. -Generator for enclosures for boards like the RaspberryPi, TK1, TX1, etc... Just a few... Some of those are mighty tall orders so break them down a bit and see what comes out of them. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|