Event Machine Shops

[IKE]

Originally Posted by Ty Tremblay

...snip...

• Tap, Die, and Drill sets
• Wrenches, screwdrivers, sockets, pliers, files
• Band Saw
• Belt sander

• Tap, Die, and Drill sets
• Wrenches, screwdrivers, sockets, pliers, files
• Band Saw (Ideally 1 wood and 1 metal)
• Belt sander
• Drill press
• Table Vise & Clamp set
  
  Additionally nice to have
• Arbor Press
• Small lathe
• Small Mill
• Welder (TIG capable of Aluminum and/or steel)
  
  Also Nice to have:
• aluminum 1x1 box and angle 1/8" and 1/16" wall
• Steel shaft 1/2" and 3/8" round keyed, and 1/2" AND 3/8" HEX
• Aluminum Plate 1/8"
• Polycarb 1/8" and 1/16"
• HDPE or UHMW 1/4"

[ASD20]

Originally Posted by IKE

• Also Nice to have:
• aluminum 1x1 box and angle 1/8" and 1/16" wall
• Steel shaft 1/2" and 3/8" round keyed, and 1/2" AND 3/8" HEX
• Aluminum Plate 1/8"
• Polycarb 1/8" and 1/16"
• HDPE or UHMW 1/4"

Are there actually competitions where the machine shop has raw materials? In New England, your options are bring it, ask another team for it, or go to Home Depot.