[FIRST EMAIL] Stop Build Day Survey

[Andrew Schreiber]

Originally Posted by Michael Corsetto

Glenn,

Really great feedback. Hawaii teams definitely are in a unique situation.

One quick thought. If there was no bag, could you design your robot to disassemble into three or four major pieces and take it on the plane with you? This could significantly reduce the amount of time 359 is without their robot. You could re-assemble at your hotel or a host team's shop once you arrive.

I mention this since 125 took their robot in a check-in bag to Arizona in 2016. It was pretty small, even in the bag. Being out of the bag would give you a lot of flexibility to break your robot apart strategically and fit it in a few check-in bags.

Not an ideal solution, but could be workable.

-Mike

For reference - 125's robot was packed into 2 checked bags. The arm/shooter mechanism and the chassis were rather simple to separate (in fact, the arm was light enough to withhold entirely). From my understanding this worked pretty well. A note was left in the Pelican case with each component to prevent the TSA from opening the bag itself. This worked fairly well.

125 also shipped tools. These were done in KoP totes instead of Pelican cases, unfortunately the airlines left the tool totes on the tarmac during a rain storm leading to about 2" of standing water in them. If bringing things by air please consider putting anything that would be negatively impacted by being submerged in water for a long time in a bag.