Robot Cart

[bcampbell]

We have a custom cart we built ourselves. Here is a picture of our cart. If you look closely there are 4 orange blocks that the robot sits on. Those blocks are adjustable and can move along the entire top rail of the cart via a standard bolt pattern. This allows us to change the cart to carry the current years robot without any modifications. 8 bolts later you can change it to fit any robot. We have roughtop on top of the blocks to get a good grip on our drive rails and to keep the robot in position. We have casters on the bottom of the cart that are similar to a grocery cart with 2 stationary and two rotating wheels that allow for easy movement. The back push bar lifts up to allow full access around the robot. When we are working on the robot in the pit the bar is removed so it is not in the way. The bottom shelf allows for storage of the control board, batteries and anything else we need.