pic: Piston-in-Tube Concept

[cbale2000]

Originally Posted by PAR_WIG1350

Isn't a pneumatic cylinder on its own already a piston-in-tube device?
.
You could shave some weight off if you used a bracket to secure a tube to the nose of the cylinder so that only the piston rod is enclosed. You might need to rethink mounting, but the weight saved would be non-negligible. In addition, it could be argued that such a design would be more faithful to the name.

Generally, in my experience, these kinds of things are more for saving space than weight. Square tube is also much easier to mount things to.

[PAR_WIG1350]

Originally Posted by cbale2000

Generally, in my experience, these kinds of things are more for saving space than weight. Square tube is also much easier to mount things to.

Any weight that can be shaved off is more weight for future improvements. Furthermore, if you wanted to place the mount near the nose of the cylinder anyway, the method I proposed would not present any impediment.