Mecanum Demo-Bot Recommendations?

[Poseidon5817]

Originally Posted by James3245

Our team has never built a mecanum drive base.

We'd like to add build one for demonstration purposes.

What is CD reader recommendations for:

-size of wheels
-vendor of wheels
-a frame that can be bolted or riveted - easy to see what is happening when bumpers removed
-a gearbox that makes both assembly and maintenance easy

Looking for a robust solution that can also be visually understood by visitors.

Thanks!

You could try using VersaFrame combined with Clamping Gearboxes, both from VexPro. We used the clamping gearboxes from VexPro in 2015 and they overall worked pretty great. It keeps the base simple, and VersaFrame is a relatively cheap, low resource option.

[jreneew2]

Originally Posted by Poseidon5817

You could try using VersaFrame combined with Clamping Gearboxes, both from VexPro. We used the clamping gearboxes from VexPro in 2015 and they overall worked pretty great. It keeps the base simple, and VersaFrame is a relatively cheap, low resource option.

True. I didn't want to recommend something I had never used.

It's probably cheaper and easier.

[Richard Wallace]

Originally Posted by Poseidon5817

You could try using VersaFrame combined with Clamping Gearboxes, both from VexPro.

That's what we did for a demo project. We went with 4" AM Mecanums. Ran that drive train for a year of demos, including several sponsor presentations, outreach events, and football games.

[rstrawsi]

We used the Vex products, including the Single Reduction Clamping Gearbox - easy to put together, held up very well and overall very happy with the results.

You can get the Vex BOM and other info here: http://www.vexrobotics.com/vexpro/examples-guides#VC

Here's a video of ours in action: https://www.facebook.com/16737887669...6466343787954/

[Poseidon5817]

Originally Posted by Richard Wallace

That's what we did for a demo project. We went with 4" AM Mecanums. Ran that drive train for a year of demos, including several sponsor presentations, outreach events, and football games.

I remember seeing that picture when you first posted it! If you don't mind me asking, what were the reasons you went with the AndyMark 4" mecanums instead of the VexPro ones? Durability?

[Richard Wallace]

Originally Posted by Poseidon5817

I remember seeing that picture when you first posted it! If you don't mind me asking, what were the reasons you went with the AndyMark 4" mecanums instead of the VexPro ones? Durability?

We went with AM HD (am-3067) mecanums because they have aluminum plates instead of plastic bodies. Their 100 lb. per wheel rating is about double that of the 217-3644/45, which are listed as "conservatively rated for a 200 lb. robot."

I believe VexPro's ratings are conservative, because I know several of the engineers there and trust their design skills. However, based on their construction, the AM HD wheels seemed like a safer choice. We did not know in advance how hard we would be working that chassis.

[Allison K]

Pictures of one of our demo bots top view and corner view. We are in the process of developing a full set of twelve robots out of the VEXPro parts (twelve different styles of drivetrains with interchangeable manipulators). Each robot is 20" x 20" for portability and ease of use in small-ish spaces.

The mecanum one pictured was a summer day camp project for an 8th-9th grade group. 4" VEXPro wheels with clamping gearboxes. I think they are 11:72, but might be 12:72. Runs just fine on both tile and carpet and has been durable enough for demo purposes (we haven't specifically tried to break it). If we hadn't scavenged the control board for another project I'd show off the nice LED underglow too.

[Poseidon5817]

Originally Posted by Richard Wallace

We went with AM HD (am-3067) mecanums because they have aluminum plates instead of plastic bodies. Their 100 lb. per wheel rating is about double that of the 217-3644/45, which are listed as "conservatively rated for a 200 lb. robot."

I believe VexPro's ratings are conservative, because I know several of the engineers there and trust their design skills. However, based on their construction, the AM HD wheels seemed like a safer choice. We did not know in advance how hard we would be working that chassis.

All right, those are all good points. With it being a demo bot, you won't always being driving it on the soft carpet surface, so it makes sense that you would want to have the stronger wheel.