Severe RobboRIO Error

[ctt956]

Originally Posted by Lingo

We don't use a different computer for the driver station but we do use one for the code, the network seems to be fine, same with the frequency. I don't understand what you say by maybe power could affect it, may you elaborate.

How are you powering the RIO? Power supply? Battery? What is connected to the RoboRIO other than power and data cables?

[Greg McKaskle]

I would recommend connecting the DS computer and roboRIO using a USB cable. If that doesn't immediately work, go to the Diagnostics tab of the DS, second from top on the left side, and determine if the DS can ping the robot successfully. Ensure that firewalls are disabled on the laptop.

Once you get this working, you can use it to correct the ethernet and then wifi.

Greg McKaskle

[Lingo]

Originally Posted by ctt956

How are you powering the RIO? Power supply? Battery? What is connected to the RoboRIO other than power and data cables?

The Rio is set up with a 12 volt battery after being put through an energy distribution board. The RIO itself is connected to the Talon set up and the afore mentioned power distribution board. Our setup with power and the likes has worked before the issue which has been plaguing our team.
Sorry for the late reply.