|
Re: Ports changed independently?
Check the can buss for issues, look for retry counts, (I think the are on the same status page, going from memory) make sure you have the can wired correctly, with terminating resistors at each end, and daisy chained through the devices.
When Setting device id's make sure you use the "Flash LED" command to identify the correct talon srx before setting the id and buss number. Quite common to setting the id to another SRX than the one you wanted.
__________________
The sooner we get behind schedule, the more time we have to catch up.
|
To sum it up... We know nothing. - BJC [more] 
31-10-2016, 07:50
Threaded Mode