|
|
|
 Your primary job is not to build the most technically advanced robot, but build the best possible team. - PayneTrain [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Your primary job is not to build the most technically advanced robot, but build the best possible team. - PayneTrain [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
[OCCRA]: 3D Printed Parts
Are 3D printed parts permissible for use on OCCRA robots?
I'm assuming most everyone has access to a 3D printer so this should not be considered an advantage. Plus, 3D printed parts are far from "precision" so there is no advantage there either. Is my assumption correct? Thanks, Jim Kemp Benzene Bots 
|
|
#2
04-11-2016, 14:38
|
|||
|
|||
|
Re: [OCCRA]: 3D Printed Parts
No--the game rules specifically state which tools are legal; assume that everything else is NOT legal, including a 3D printer. SEE Appendix A in the Official OCCRA Rules for the exact list of allowed tools.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
