What brand of pneumatics do you use?

[FrankJ]

I am surprised you had problems with SMC. They make good stuff. We use mostly Automation Direct. Nitra is their house brand not an actual MFR. AD has good customer service, good prices, and fast shipping (free for orders over $49).

[lark95]

Originally Posted by FrankJ

I am surprised you had problems with SMC. They make good stuff. We use mostly Automation Direct. Nitra is their house brand not an actual MFR. AD has good customer service, good prices, and fast shipping (free for orders over $49).

We did not have problems with the SMC parts themselves. We did not stock spare parts properly and when we broke one of the solenoids by striping out one of the screw we couldn't find any teams that had any spare parts at competition. The reason for this thread is to find what other teams are using so that we can use what other teams are using for better support at competition.

[euhlmann]

We also use many Bimba products

[Dave Campbell]

We use Clippard pneumatics - exclusively. Extensive parts catalog, quick orders. Of course, they're one of our team sponsors and hire many of our students.

[Nitay]

Clippard, Bimba and Baccara (a local manufacturer).

[CalTran]

Bimba cylinders, Festo solenoids, Clippard tanks, McMaster tubing. Kinda just the standard stuff that comes in the kit, with the occasional order from McMaster or Bimba for custom stuff.
Fun fact, a few years back, one of our mentors ordered like a 3" bore 36" stroke cylinder to test the limits of what Bimba can make.

[Wren Hensgen]

Originally Posted by CalTran

Bimba cylinders, Festo solenoids, Clippard tanks, McMaster tubing. Kinda just the standard stuff that comes in the kit, with the occasional order from McMaster or Bimba for custom stuff.
Fun fact, a few years back, one of our mentors ordered like a 3" bore 36" stroke cylinder to test the limits of what Bimba can make.

I have, sitting at my desk right now, a 30" stroke, 3" bore reverse acting cylinder. It's spring extend, and air pressure to retract, and could be used as a jousting lance.

[GeeTwo]

Originally Posted by lark95

We did not have problems with the SMC parts themselves. We did not stock spare parts properly and when we broke one of the solenoids by striping out one of the screw we couldn't find any teams that had any spare parts at competition. The reason for this thread is to find what other teams are using so that we can use what other teams are using for better support at competition.

If you're using really really standard sizes (e.g. recommended cylinder for a COTS shifter or butterfly module), you might find a spare, but even coming off the Bimba voucher, there are several dozen combinations of stroke and diameter, so it is unlikely that anyone will have a match on hand. if you're using a cylinder that isn't on the voucher or recommended for a COTS subsystem, it's a long shot in the dark. We build "twin" robots to have one for practice and tweaking, and if nothing else, we always bring the pneumatic cylinders from the practice robot, and usually the compressor, solenoid valves, and other COTS parts.

We use mostly Bimba as well; their online CAD generator is great! Even though we didn't CAD our launcher last year, we were able to use the CAD to build a model of the cylinder we used to stretch the springs, so we were able to build the rest of the launcher to fit. This was essential, as our cylinders last year did not arrive until after stop build. These were custom cylinders ordered around mid-build season.