Rate my Talon SRX breakout (EagleCAD)

Football has been a school institution for over 100 years--we can't expect FIRST to show the same potential in a 10th of that. - Petey [more]

		Chief Delphi > Technical > Electrical
Rate my Talon SRX breakout (EagleCAD)

Thread Tools

Rate Thread

Display Modes

20-11-2016, 16:58

Maxwell777 Maxwell777 is offline

Is allowed to touch stuff now

AKA: Jackson Gray

FRC #0842 (Falcon Robotics)

Team Role: Programmer

Join Date: Aug 2013

Rookie Year: 2014

Location: Phoenix, AZ

Posts: 72

Re: Rate my Talon SRX breakout (EagleCAD)

Quote:

Originally Posted by asid61

You should assume 5v for all your calculations, because that's your maximum voltage.

The schematic should be wired such that the LED is always fed from the 3.3v rail, but the transistor base is fed by either 5v or 3v from the encoder. Unless that's not how electronics works, which is highly likely considering my background in electrical engineering consists of connecting red to red/black to black and V=I*R.

__________________
But why?

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 12:42.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.