|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#61
|
|||
|
|||
|
Re: [FRC Blog] FIRST Choice 2017
We (almost surely) will get more points for round 2, and we're often limited to 1 or 2 game pieces from FIRST Choice anyway.
|
|
#62
|
|||||
|
|||||
|
Re: [FRC Blog] FIRST Choice 2017
Lest you think the AndyMark people got some jump, 5402 got its first seven, then #10, then #12.
(We loaded up on Talons, SPs, CIMs, a spare VRM and signal light, and some fans because it's historically a pain to get a truly legal one in the heat of build season.) |
|
#63
|
||||
|
||||
|
Re: [FRC Blog] FIRST Choice 2017
These are absurdly expensive if you ever have to buy them.
|
|
#64
|
|||||
|
|||||
|
Re: [FRC Blog] FIRST Choice 2017
We got 23 of the top 24 items on the priority list that was used.
Unfortunately, the list wasn't exactly in the order I thought it was. The only one which likely had impact was the NavX being moved from #3 to #14. I didn't know why I had put the compressor on the list. I couldn't possibly have foreseen that we would break one last night. (The arm of an pre-season robot rammed into the "christmas tree" on the compressor, breaking off the threads which secure the check valve.) Well, the replacement is already on the way! The bent and broken rods on a couple of Bimba cylinders re-used from our Aerial Assist robot probably won't be replaced. ![]() Edit: And yes, a signal light - last thing that we got! Last edited by GeeTwo : 12-09-2016 at 09:46 AM. |
|
#65
|
||||
|
||||
|
Re: [FRC Blog] FIRST Choice 2017
We did not get a RSL because we saw that it is coming in the kickoff kit. Then again, they are always a rarity. We got a PDP, 4 Talons, the accelerometer & gyro, and the navX-micro.
|
|
#66
|
|||
|
|||
|
Re: [FRC Blog] FIRST Choice 2017
We got items #1-#14 and #17 from our list.
|
|
#67
|
||||
|
||||
|
Re: [FRC Blog] FIRST Choice 2017
4 tallons
4 CIM motors A Nvidia TX1 A Ten Degrees of Freedom MXP sensor from Analog Devices An AMT 103-V encoder |
|
#68
|
||||
|
||||
|
Re: [FRC Blog] FIRST Choice 2017
It is one of the few remaining required components of the robots that are commercial grade.
|
|
#69
|
||||
|
||||
|
Re: [FRC Blog] FIRST Choice 2017
We at 159 got some pretty good stuff. A PD Board, four Talon SRXs, a PCM, and two CIMS. This was all the stuff we really wanted. This amounted to 740 credits, the last 10 came from... Drum-roll please... a Shaft coupling hub. Coupling Disc and matching hub not included. This is what happens when you don't pay attention to things you put low on your list. You get a third of a shaft coupling.
![]() |
|
#70
|
|||
|
|||
|
Re: [FRC Blog] FIRST Choice 2017
Wow, 23 items!! Is that the record for items in one order via FirstChoice?
|
|
#71
|
||||
|
||||
|
Re: [FRC Blog] FIRST Choice 2017
Quote:
1) move to something cheaper 2) move to something that is easier to mount 3) make it easier to wire and use. Make rotating beacons great again! |
|
#72
|
||||
|
||||
|
Re: [FRC Blog] FIRST Choice 2017
I miss the dome lights.
|
|
#73
|
||||
|
||||
|
Re: [FRC Blog] FIRST Choice 2017
I'm assuming this is a part that is very freely donated by Allen Bradley so these issues do not really come up on the KOP radar, lest another supplier comes to them with a free status light that also does those things.
|
|
#74
|
||||
|
||||
|
Re: [FRC Blog] FIRST Choice 2017
Everything is better than the flags.
|
|
#75
|
|||||
|
|||||
|
Re: [FRC Blog] FIRST Choice 2017
Quote:
Mostly we ordered key items that we pay for from time to time, but also put in for things that looked like they would be neat to have in the prototyping bag of tricks, like the Oldhams. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|